Adventure Force Spectrum Mod Kit

Our Adventure Force Spectrum Mod kit has all of the components needed to re- wire to be LiPo compatible and increase its performance. (Muzzle and Top Rail sold separately).

*LiPo BATTERIES CAN BE DANGEROUS!

OUT OF DARTS DOES NOT TAKE ANY RESPONSIBILITY FOR BATTERY HANDLING OR MISUSE. READ THIS ENTIRE PAGE ON LiPo SAFETY BEFORE PURCHASING 

*For the Red version of this blaster the jam door screw boss nearest to the flywheels needs to be removed to install this cage.

For best alignment of flywheels with the magazine trim the mounting posts for the cage by 1-2mm

Battery, charger and LiPo alarm are optional add-ons.  LiPo Battery add-on can only be shipped by ground to the continental USA. All packages containing LiPo Batteries have longer delivery times. For more information visit our FAQ page.

FEATURES:
• Easy mounting of your rev trigger with our custom switch plate
• Simply glue in place with minimal interior shell trimming required
• Full mod-guide to walk you through the mod
• Just add a LiPo, alarm, and charger and you’re good to go!
• Save 12% off buying individual parts!

INCLUDES:
• 1x – Daybreak DZAF Spectrum 3D printed cage in PLA (Multiple spacing/FPS options)
• 2x – Fang Motors
• 4x – Flywheel Cage Screws (M2x5mm)
• 1x – Daybreak Flywheels (Pair)
• 1x – 21A Tezuo lever switch
• 1x – 16AWG Red/Black Precut Silicone Hobby Wire
• 1x – XT-60 Male Connector
• 2x – Large Heat Shrink Wrap (cut to 1″)
• 1x – Small Heat Shrink Wrap (cut to 6″)
• 1x – Spectrum Switch Plate 
• 2x – 3D printed Motor Spacers

SPECS:
• Material: 3D Printed PLA plastic
• Velocity on 42mm: 140FPS
 
RECOMMENDED TOOLS:
• Soldering Iron and Solder + safety glasses
• #1 Screwdriver
• Flush cutters and Hobby Knife

OPTIONAL ADD-ONS:
• 2s 850 mAh Tattu LiPo
• LiPo Starter Pack

ADDITIONAL LINKS:
• More Spectrum mods